This button also changes digits in the 1’s place when setting a second beep (par time). NUMBER- Pressing the NUMBER button will show the number of the shot currently being displayed. This button also changes digits in the 10’s place when setting a second beep (par time). If you hold down the NUMBER button while you press the REVIEW button the shots will be reviewed in reverse order. When the button is released, the time from the start beep to that shot is displayed. The shot number is displayed as long as you hold the button OR for. REVIEW- After your last shot, you can review other shots by pressing this button. Looking at the front of the case left to right you will see Review, Number, Split, 2nd Beep, and Power ON buttons. The Inst (Instant) setting will provide an in- stant start, and the Rand (Random) setting will provide a delayed start of 4 to 6 seconds. The markings for its setting are on the case front near the edge. Setting the Start Delay The start delay slide switch is located on the side of the Pocket Pro near the start button. Doing so may prevent proper sound pickup and/or coupling of the buzzer sound into the sensor causing a false shot to be recorded. When operating the Pocket Pro be careful not to cover the sensor opening with your hand. The shot sensor is located next to the buzzer on the front of the case. The timer can record and store up to 99 shots for a given timing cycle. Shot Detection Each time a shot is detected, it will be added to the “shot string” maintained within the timer. The last shot string and 2nd beep (par time) setting will be saved in power down memory. It will turn off by itself after 10 minutes of inactivity. To reset the Pocket Pro, press the start button again. The time to the last shot will be displayed. Quick Start If you want to get started right away, all you have to do is press the POWER ON button, then the START button on the side, and shoot (You can also tap on the front of the case near the sensor open- ing to simulate shots). When the battery becomes deplet- the display during use. A new battery will pro- vide approximately 20 hours of use. MAXIMUM TIME (before wraparound): 199.SHOT TIMER OPERATING INSTRUCTIONS rev.3 2010 Battery Installation/ Status The Pocket Pro timer operates from a 9 volt alkaline battery.To install the battery, remove the cover on the back of the unit, connect the battery to the snap clip and reinstall the cover.PAR TIME LIMIT (stop tone): 199.9 seconds.Start tone (instant, fixed, adjustable random).Large, easy to read lighted graphics LCD displays full words and description of functions.Review four shots at once, forward or reverse with split times.Powered by one 9 volt alkaline battery (not included) for approx.Display position is readable from your belt or the bench.Large clothespin style belt clip fits over your shooting belt.Turns off automatically after 10 minutes of inactivity or by pressing a button.1.5kHz start buzzer frequency transmits well through hearing protection.Size fits nicely in your hand with the start button on the side.Requires one 9 volt alkaline battery for operation. The Pocket Pro II measures shot time intervals for personal practice and scoring matches! All the features you want in a user friendly design. The only way to get faster is to beat the timer!
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |